(Newswire.net — December 19, 2018) — Carpets are something of us would like to maintain in the best possible condition. However, in spite of our best care, mistakes do happen. If you have children in your home, it is quite possible that you could end up with ballpoint pen ink stuck on the carpets. This is certainly not a good news and you have to act fast to remedy the situation. Otherwise, you could have a permanent stain behind which might become too difficult to remove. We will be sharing some proven and time-tested ways on how to remove ballpoint ink from carpet. You must be sure that the ink removal process does not remove the dye from the carpet fibers. It would be better to test a small area before you actually go about removing the ink stain. We are sure it will be quite helpful in protecting and preventing your expensive carpet from ugly looking ballpoint ink stains.
How to Remove Ballpoint Ink From Carpet
Things You Would Need
The process is quite easy, you will need a few things. To begin with you would need a quality carpet stain remover. Further you would require a soft cloth, rubbing alcohol, carpet shampoo (not obligatory) and water. With these you can go about removing the stains quite easily. Let us look at the steps one by one.
Use Carpet Stain Remover –
Have you used a stain remover when your dog goes to the bathroom on your carpet? You will use the same stain remover for ballpoint ink. Luckily, ballpoint ink does not get absorbed by the carpet, which happens with other inks. Because of this, Cosmopolitan Carpet says at times using only a stain remover is enough to remove ballpoint ink.
Wipe with a Clean Cloth –
Once the stain remover has been applied, you must use a clean cloth and have the area blotted. Ensure that the cloth is turned frequently so that the clean surface in always in touch with the carpet. If you fail to do this, you could stain the carpet over and over again with the cleaning cloth. Keep applying the stain remover till there is zero transfer of stain from the expensive carpet to the cloth.
Conduct a Test –
The next step is to test a hidden area. You will blot the test area with rubbing alcohol. You should wait for around 10 minutes and then dry the area with the help of a soft and clean cloth. Ensure that there is no change in the color even after a few hours. You also must find out if any color moves from carpet to the cloth when blotting takes place. If you find the carpet colorfast then it is safe to move forward.
Use a Cloth Dipped in Alcohol –
Wet a soft cloth and be sure that it is wetted with rubbing alcohol. You also could use a cotton swab if the area to be covered is not very big. The moistened cloth must be blotted on the carpet and in the place where there is stain. Turn the cloth or cotton swab frequently for obvious reasons. Repeat this process till the stain is completely removed.
Use Carpet Shampoo –
You also could use a carpet shampoo and rinse it with water once the stain has been removed.
Bottom Line
We are sure that the above steps will help you know how to remove ballpoint ink from carpet. Remember that before using rubbing alcohol on the stain, test it on your carpet first to ensure it won’t remove any color. Because ballpoint ink won’t be absorbed by the carpet, using carpet stain remover should remove the ink entirely.