Most Effective Carpet Cleaning Method – What You Need

Photo of author

( — September 16, 2019) — Time to clean the carpet, but not sure which is the most effective carpet cleaning method? Don’t worry: it’s a common concern. Usually, people prefer to recur to carpet cleaning services and save themselves from the trouble, but if you feel like it, you might as well find out which is the best way to clean carpet yourself. This article will teach you how to clean rugs and carpets by yourself through some of the most popular methods, weighing the pros and cons along the way. And by the end of the article, we assure you, you will have found your best solution!

Most Effective Carpet Cleaning Method 

What’s the most effective carpet cleaning method? You can opt for wet cleaning, absorbent pad, dry cleaning and more.

Wet Cleaning

Also known as hot water extraction or steam cleaning, this method uses what the title implies: water. Basically, you firstly apply a chemical reagent that liquefies soils and substances stuck in the fibers, and later your carpet is injected with semi boiling, pressurized water. Ten to fifteen minutes later, you extract the solution with a vacuum and leave it to dry.

This is the most popular method, and also the most recommended one — especially for stains. However, the drying time can be a bit longer than usual, and most equipment and materials are rather costly. Indeed, this method is perhaps the most efficient one and best for those who have allergies, but if you want to do it yourself, keep in mind it’s pricey.

Absorbent Pad

Also known as bonnet cleaning, this method is the most used one for regular maintenance and for any spills. Basically, you first vacuum the carpet and then spray a chemical solution with a pump or electric sprayer. Once the solution starts to react, you place the absorbent pad on the drive block of a rotary floor machine and spin it over the surface. This machine, alongside the pad and the chemicals, impregnates the chemical solution to the fibers and picks up the soils found among them.

This is the fastest, simplest and most cost-effective option for most carpet owners, especially for lightly soiled carpets. However, keep in mind that this method can’t reach deeper levels and could even leave dirt and chemicals accumulating at the bottom. If left unattended, this might become a hazardous problem for the people living in the house.

Dry Cleaning with Absorbent Compound

You spread a special mix of powder, solvents and cleaning agents over the carpet, and then use a counter-rotating brush machine to work your way through the fibers. The powder will absorb the soil from the fibers, and ten to fifteen minutes later, it’ll be ready for vacuuming.

This is the simplest method of our list. You don’t require special training or equipment for it. Furthermore, carpets dry faster with this method, which makes it quite convenient.

Sadly, as with the absorbent pad method, the brushes can’t reach the very bottom of the fibers, and might even trap the powder and dust among them, leaving them to build up over time. Once again, if left unattended, this might become hazardous for you and your family.

Dry Foam / Rotary Shampoo

This method requires you to apply a cleaning agent onto the carpet to suspend the dirt so you can whip it with foam and, afterwards, clean the carpet through a special rotating machine. After a while, you vacuum the foam and leave it to dry.

This fast and inexpensive method has the great benefit of using a small amount of moisture. Sadly, its extraction capacity is, once again, insufficient (it won’t reach the bottom of the carpet either), so, despite its fast-drying benefit, the carpet won’t be as clean as you might expect — especially if you’ve gotten powder makeup and other hard to remove substances on it.

Do I need to rinse after shampooing carpet?

It will take more time, but it would keep your carpet cleaner, yes.

If you want to rinse after shampooing, we recommend using a mix of vinegar and water poured into the tank of the carpet cleaning machine. This is safer than most solutions and chemicals, and it’s just as effective as them.

Does shampooing ruin carpets?

No – as long as you use the right brand and product. Overall, however, most carpet shampoos are safe and don’t ruin your carpets.

Bottom Line

As you could have noticed, there’s not exactly a most effective carpet cleaning method: each method we listed has its pros and cons, and your choice ultimately depends on your considerations. Do you want efficiency over price, or do you have a budget to prioritize? Would you rather invest in carpet cleaning services than doing the hard work, or are you willing to do it yourself? As you can see, the best way to clean carpet yourself tends to ask for some investment, but now that you know how to clean rugs and carpets efficiently, it’s not as complicated as it sounds! You just have to find the best option for you and get going with some carpet cleaning hacks and basics!