(Newswire.net — October 12, 2020) — In many applications where the floor is subjected to heavy and repeated stresses, it is customary to provide concrete floors, as they are durable and have the required strength to withstand the demands put on them. Concrete, however, is drab and unappealing, and you can transform your workspace with the use of epoxy floor coating that will give it a completely different look that can be quite attractive.
Epoxy floor coatings can provide a surface that is shiny and glossy that increases the brightness in an interior enclosed area. The coated surface becomes durable and hard-wearing and can easily withstand continuous heavy traffic. Epoxy floor coatings are easy to install and do not need any special equipment. The coated surface then becomes easy to clean. It resists oil and water, and prevents the staining of the floor. The surface then becomes seamless and will last for many years. To maintain the shine and life of floor coating it is important to keep it clean, pioneer eclipse floor polishers and burnishers are designed to be flexible enough to meet the needs of almost any sized business. If your company has any sort of problem with dull spots on the floor, then the Eclipse might be for you.
Epoxy floor coatings come in a variety of colours, and this enables floors to be colour coded for various uses, and this can greatly add to the safety in industrial environments. This allows for easy identification of driveways and walkable areas. Anti-slip additives can be added into these coatings so that it makes the coated floors safer to use. These coatings do not require major maintenance and surfaces can easily be cleaned with water. Visit Milestone Flooring, to help you choose the right color for your epoxy coating.
Epoxy floor coatings are two-part coatings that have a resin and a hardener. These two parts that have to be properly mixed and applied before the hardener sets. It requires that care be taken to only mix those quantities that can be applied immediately to a floor that has been properly prepared to receive the coating. It is important that before you apply an epoxy coating to any concrete floor, that you inspect the floor for any cracks or defects and make the necessary repairs. It can also be a good time to correct any level of defects through the use of self-levelling preparations.
Before application of the coating, make sure the floor is completely dried out, especially if you have undertaken any repairs that have needed curing. Epoxy will not bond to floors that have been sealed or are polished, and you may need to remove the sealants and create a slight roughness on polished concrete so that the epoxy can bond to the surface. Some manufacturers of these paints may require you to add primers to surfaces and it is best to follow the manufacturer’s instructions in this regard.
Epoxies do not dry like paint where the solvent evaporates, but actually go through a process of curing that hardens through a chemical reaction of its two different components. This process requires at least twenty-four hours. Choose the right epoxy so that it suits the surface on which it is being applied and will also be suitable for the conditions that the floor will be subject to.