(Newswire.net — October 17, 2019) — Nowadays, most homes in America have air conditioners that help to regulate temperature, especially during extreme weather conditions such as winter. These machines can help keep your house warm or cool at a single touch of the button. Nevertheless, it’s important to know the inner workings of your conditioner, so as to know what to do in case of any mechanical issues. Below are some of the air conditioning basics and machine parts you should know about:
Air Conditioning Basics
If you are looking for the basics of air conditioning, you are in the right place. This article will go into everything you need to know about your AC unit so you can repair your unit.
I) Evaporator coil
The evaporator coil component is responsible for continuously cooling the atmosphere found in your home, which is done by removing hot-air inside the room to be replaced by a much cooler circulation.
The evaporator coil consists of a long, spiral metal pipe fitted with small fins that help to filter the air. When pressurized refrigerant liquid found in the A/C comes into contact with the evaporator coil, it moves up the device and is turned into gas which helps to dissipate excessive heat from the atmosphere.
Moreover, the spiral structure of this coil allows for extra surface area for air to pass through the device, thereby ensuring as much heat as possible is absorbed by the conditioner. As refrigerator liquid passes through this component, it becomes a cool, low-pressure gas that’s transferred to compressor chamber for further processing.
II) Compressor
This unit is often regarded as the A/Cs heart due to its ability to pump refrigerant liquid throughout the machine, it draws in cool, unpressurized refrigerant vapor from the machine then raises the temperature and pressure before the substance is released as warm gas into the room. Basically, the compressor’s work is to condense the refrigerant as it travels along in order to raise its temperature levels.
Most of these machines use centrifugal force to draw up the refrigerant gas before spinning it forcefully using an impeller, which ultimately causes the compression. Nevertheless, nowadays there are a few models with rotary-compressors which are much smaller in size, and therefore operate with less noise. The internal parts of this compressor have a shaft fitted with several blades, this razor-edged shaft spins within a graduated cylinder which propels the refrigerant through the tube while also compressing it at the same time.
III) Condenser Coil
In addition to the evaporator, air-cons have another wiring unit known as the condenser coil. This component helps to dissipate the absorbed heat by directly transferring it into the environment. Once the refrigerant is condensed and warmed inside the compressor, it moves to condenser-coil which serves to blow it out into the atmosphere.
Since these units usually work overtime and may gather dirt from the environment, it’s recommended to clean your condenser coils regularly so as to keep it running efficiently. Note that a sullied condenser coil may drastically reduce the performance of your air conditioner, as well as shorten its lifespan.
It is important to understand air conditioning basics to increase your AC units efficiency. An air conditioner is a complex machine with various internal components that help it to run. For instance, the evaporator coil is responsible for drawing hot air from the environment so that it can be cooled down by the machine before release. Likewise, the compressor helps to transport refrigerant liquid through the device for use. If you have a problem with your AC unit you can always contact a professional repair service for aid.