(Newswire.net — January 11, 2019) — Do you know the secret of removing water stains from carpet? Carpets are prone to almost all types of stains and stains are one of the main causes behind wearing and tearing of the carpet. Most of the stains on carpets include food stains, pet stains, and mud stains and beverages spills, just to name a few. Apart from these, carpet can be stained by water spills. When water dries out, small sediments traces start to appear on the surface of the carpet. If not removed, water stains may lead to the development of mildew and mold below the carpet surface. The good thing is, removing water stains from carpet is no hard task.
Removing Water Stains From Carpet
Absorb Water
The first step of removing water stains from your carpet is absorbing as much of the liquid as possible using a dry cloth or towel. This will prevent the water from seeping deeper into the fibers of your carpet and will also prepare your carpet for the cleaning process. Make sure not to rub at the area as it will only push the water further into the carpet and make it difficult to remove. Just place the towel over the spill and press gently. You can also leave an object such as a book over the towel and walk away for a while to allow the water to get absorbed.
Choose a Good Cleaning Product
Now that the excess fluid is gone you will begin the actual stain removal. For this, you may choose one of many commercial cleaning products or make one yourself out of common household items. If you choose a store-bought cleaner, make sure to read the cleaning instructions and make sure that it is compatible with your type of carpet. If you prefer to go the natural way, white vinegar is also an effective ingredient in removing water stains. To use white vinegar, mix one teaspoon of it with a cup of warm water. Always test any cleaning solution in a small, out of site area first.
The pH of vinegar will work on the stains effectively. Rub prepared mixture on the water stains lightly. Make sure you avoid rubbing the rag on the carpet. Let the mixture touch the upper edge of the stains. You should not saturate the carpet again.
Spray the Stained Area
Put the cleaning agent of your choice inside a spray bottle, if it isn’t already, and spray it onto the stained area. Allow the cleaner to work for about ten minutes and then start blotting the stain using a clean, dry cloth. Make sure not to over saturate the area with your cleaner. Only use a little at a time. DYW Carpet cleaning says If the stain doesn’t come out at first, just repeat the steps.
Rinse with Clean Water to Remove Excess Cleaning Agent
Once water stain has been removed, rinse the area with clean water to remove any excess cleaning agent that might be left behind. Skipping this step will allow residue from your cleaning solution to be left behind. This residue is known to attract dirt, which will cause the area to dirty again.
The next time you have a dirty water spill on your carpet, you don’t need panic and worry about cleaning it up. These simple steps in removing water stains from carpet will help clean your carpet efficiently and effectively.