Different Types of Saw Tables

Photo of author

(Newswire.net — March 2, 2022) –Saw tables are a crucial instrument when it comes to completing any home improvement project. There are a variety of saw tables in the market. However, choosing the most suitable one is an arduous task. We will help you select the best among them all. If you’re planning to purchase a saw table, go to this Top Table Saw Under 300 for the tables that fit within your budget of yours.

Types of Table Saws

Two kinds are portable and stationary.

Portable

Portable table saws are small and are designed to be light and set on tables. The models available in this range comprise compact, benchtop, or Jobsite table saws.

Benchtop

As their name suggests, you can place them on a workbench or table. They’re not supplied with a support stand. They’re light in weight and are often utilized by hobbyists, homeowners, and DIYers. They’re powered with a direct-drive (blade-driven) motor and offer great portability. They also offer great value for the money.

Compact

Compact saws are more spacious than benchtop models and are generally driven by smaller toothed belts. They’re similar to the contractor-style saws but provide a smaller table.

Jobsite

Models for job sites, on the other hand, are mounted on stands. They’re bigger than benchtop models and are used by professionals in the trade. They’re also stronger to withstand the rigors of construction locations. They’re still built with a lightweight frame to allow for mobility.

Stationary

The most common use of stationary saws is by woodworking enthusiasts who are serious and cabinet makers. There are models like a hybrid, contractor table saws, and cabinet table saws.

Contractor

The first contractor saws were made with a professional mind and are not common in the present time. A lot of people confuse the Jobsite and the contractor models with the same one. Although there are differences in the designs of the past, the models of a few in the past were more advanced in terms of construction.

I’ve written an in-depth piece on the various types of models available here.

Hybrid

Hybrid saws offer a variety of features that are typical of the most expensive cabinet saw. They’re similar to some of the older models, which were made decades ago.

The majority of them have an enclosed cabinet design however some models have an open leg design. This will increase dust collection similar to those of cabinet saws.

Cabinet

The table saws on cabinets are my top choice. They’re also among the most expensive!

They’re really heavy. They’re typically constructed of steel and cast iron to reduce vibration and increase precision. Woodworkers will be able to tell you the difference in regards to accuracy.

They’re designed for serious professionals. Period. Created to be strong and durable they are built to last for years to come.

They’re constructed with an enclosed base to ensure better dust removal. They also have an induction motor with a 3 to 5 horsepower (2.24 3.73 to 3.73 Kilowatts) band (single-phase).

I’ve created a new article that provides more insight into the various types of table saws.

Table Saws Basics

Table saws are made of cast iron and constructed with a flat, smooth surface. I won’t go into great detail on the table below, however, it must be smooth and flat.

However, they don’t need to be perfectly flat. Be particular about the blade’s area. It should be smooth because this is the primary thing that counts.

The blade, the rip fence, and the miter gauge are the three most essential elements of a table saw. I’ll go into more detail below.

Blade

The blade is among the if not the most crucial aspects of the table saw. I would recommend starting with a good blade since this is an important feature that will make the difference. You can trust me.

The blade’s specifications are determined by the number of teeth. Additionally, the dimensions of the kerf, size of the arbor and diameter, as well as application speed materials, as well as application.

The typical blade’s size will be 10-“, which will give you around a 3- 1/2 ” cutting capacity when viewed from 90°. There are also 12″ blades sizes too.

Blades are made of carbon, carbide, or diamond-tipped teeth. Nowadays they can cut through other materials than wood.

Blades are complex, yet it is an essential element to know about Table saws.

For a comprehensive look at the elements that make up the blade of a table saw I’ve created this article here. This article will provide you with all the information that you should know.

Don’t skip past it. It will allow you to know the kinds of adjustments needed. This includes different blade types (rip as well as crosscut) and sizes, materials, and RPM.

Rip Fence & Capacity

It is also referred to as a rip fence that serves as a cutting guideline that extends from the table’s front towards the back. It is in line with cut planes of blades.

It gives it a distinct advantage over other saws – like circular saws.

It is essential to have a fence that secures the material and does not move out of its position. It must be neat and straight to make sure you get an exact cut.

The majority of saws come with the standard rip fence, also commonly referred to as the T-square fence. It has good precision and is suitable for common users. If the fence was not there, every kind of cutting would be difficult.

Adjust the fence to align where the blade is in position to slice the substance.

For some top-quality cabinet saw models, a few do not come with a fence. Instead, they give you the possibility of customizing your setting.

The capacity for ripping is another crucial spec. In the beginning, you will measure the distance between the blade of the saw. Next, determine the biggest distance the fence can travel in the direction to the right-hand side of the blade. This is the rip capacity.

To use any Jobsite saw, you’ll require a capacity that is greater than 24 inches. The main reason is that it’s just half the length of sheet materials.

To learn more about the purpose of the fence rip you can read my article here.

Miter Gauge

Miter gauges hold and guide the material at a certain angle to create a perfect cut. The locking mechanism is pivotable from 45 degrees to -45° and then slides into the slot (miter slot).

A quick note. Make sure the miter slot is not a proprietary model and it’s standard. This way, you won’t have problems fitting accessories, for instance, a Sled.

When you’re looking to make a straight right-angled, cutting or a compound one, the first step is to alter the gauge of your miter. It is comprised of two angles, miter, and bevel/blade tilt.

More details are available here, where I will discuss the features of miter gauges.

Motor & Drive Configuration

They come in two versions Belt-drive or Direct-drive.

Direct-drive

Direct-drives are typically found in the table saw portable range. They have a motor that drives directly the blade and generates plenty of power – however, they can be quite loud.

They work using 120V circuits and can generate up to 2 horsepower. This is sufficient for the professional and DIYer on working sites.

Belt-drive

Belt-driven saws are much more powerful and can be found in the stationary selection of models. Induction motors and belts transmit power to the blade as the name implies.

The motor can produce anything from 3 to 5 horsepower (2.24 up to 3.73 Kilowatts) single-phase as well as 5 to 7.5 horsepower (3.73 up to 5.22 in kW) three-phase. This latter one would need to run with 240v.

The motor can be adjusted to keep dust from getting trapped inside the mechanism. They’re also much quieter than direct drives and designed to cut through thick material.

Conclusion:

We believe that every product is not suitable for you. So, if you are thinking about buying any saw tables, we would like to suggest visiting alltheragefaces.com for your needs. The website offers a wealth of information about different types of saw tables which you can get here.